CBF-300/400/500/600加防护网岗位式防爆轴流风机型号含义
CBF-□/□□□
B:带百叶(不带不注)
安装方式(Ⅰ:壁式(可不注);Ⅱ:管道式;Ⅲ:岗位式;Ⅳ:固定式)
额定电压
扇叶直径
防爆轴流风机
注:本系列风机所带百叶为可拆卸式,用户可根据需要自行安装。
例:若需订购BFC防爆轴流风机,扇叶直径为600㎜、额定电压为220V、安装方式为管道式、不带百叶,刚订货型号为“CBF-600/220‖"。
产品特点:
1、防爆轴流风机由防爆电机、扇叶、风筒等部分组成;
2、扇叶采用了大弦长、空间扭曲、倾斜式结构宽叶片,使其在较低转速驱动的前提下,也能达到所需风量、风压;
3、叶轮结构为可调式,可根据用户及使用场所的出风要求进行适当调整,方便灵活;
4、叶轮安装采用对称式,根据调节角度的不同,可以在同一安装位置实现正反双向通风,为用户现场安装和使用带来便利;
5、噪声低、能耗低、防爆性能可靠;
6、安装方式灵活多样,有壁式、管道式、岗位式、固定式;
7、叶轮转速(或电机功率或风量)可根据用户要求选配
CBF-300/400/500/600加防护网岗位式防爆轴流风机产品特点 Features
1.壳体采用高强度合金铝一次性压铸成型,表面经高速抛丸清理后高压静电喷塑。外壳结构紧凑合理、材质密度高强度好、防爆性能优良,表面塑粉附着力强具有良好的防腐能力,表面光洁,美观大方;
2.内装高分断小型断路器或低压塑壳式断路器;
3.具有过载、短路保护功能;
4.也可根据要求加装漏电保护;
5. 加装漏电保护后,当漏电电流达到或超过规定值时,能自动跳闸,切断线路,确保人身及设备安全;
6. 钢管或电缆布线。
1.Shell made of high strength aluminum alloy casting off the surface after blast cleaning by high voltage electrostatic spray.Shell compact structure, high density material strength, Explosion-proof performance, the surface of plastic powderadhesion ability with good anti-corrosion, the surface smooth, elegant appearance;
2. Built-in hight disjunction mini breaker or and low voltage plastic circuit breaker;
3. With overload and short circuit protection functions;
4. It can be added leaking protection;
5. after adding the leakage proection device, the circuit breaker can auto trip and turn off when the power current is on
or over the rated value, to ensure safety of personnel and facilitirs;
6. Wiring with steel tube or cable.